¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡¡ English ¡¡¡¡ÖÐÎÄ
    ¡ó Diagnostic Cables
    ¡ó Mileage Correction
    ¡ó Key Programmer
    ¡ó Auto Immo Reader
    ¡ó Auto Maintenance
    ¡ó Auto Programmer
    ¡ó Car Chip Tuning
    ¡ó Airbag Reseter
    ¡ó Auto Code Reader
    ¡ó Auto OEM Tester
    ¡ó Auto Accessory
    ¡ó Auto Repair Data
    Useful Links

    Diagnostic Cables
    ¡¾Print Page ¡¿ ¡¾Close¡¿


    ACI Scan Tool is a professional PC diagnostics scan tool for all OBDII (OBD2) and EOBD IV+ compliant vehicles. ACI Scan Tool allows you to read the vehicle's diagnostic trouble codes, live vehicle sensors (including wide-band O2 sensors), actuate bi-directional controls, reset adaptations, and view inspection / maintenance system test results to quickly determine what service the vehicle requires.

    ACI SCANNER Introduction
    ACI Auto Communication Interface is 100% compatible with AUTO ENGIUITY OE-LEVEL software, Support all Enhanced Options
    ACI Scan Tool is a professional PC diagnostics scan tool for all OBDII (OBD2) and EOBD IV+ compliant vehicles.ACI Scan Tool allows you to read the vehicle's diagnostic trouble codes,  live  vehicle  sensors  (including  wide-band  O2  sensors),  actuate  bi-directional controls,  reset  adaptations,  and  view  inspection/maintenance  system test  results  to  quickly determine what service the vehicle requires.    What ACI OBD2 Scan Tool can do for you?  

    Professional Diagnostics 
    In the professional repair business getting as much coverage as you can is important to effectively and quickly service any vehicle. We offer enhanced coverage options for 43 car brands:    Ford/Lincoln/Mercury,  GM-family, Chrysler family Toyota/Lexus/Scion, Mazda, Nissan/Infiniti, BMW/MINI, Land Rover, Honda/Acura, Subaru, Mitsubishi, Isuzu, Porsche, Mercedes, Hyundai/Kia, Jaguar, and Audi/VW.  Not Simple Code Reader  So you read your vehicle's trouble codes, now what? Reading the trouble codes from your vehicle is easy. But without live data and bi-directional controls, you may not have enough information to properly perform the repair. Don't waste your time or money with simple code readers or hand-held scanners. ACI OBD2 scan tool can not only read your codes, but it can also show you live data, actuate components, and  run system tests. With complete coverage, you can get the job done right the first  time and prevent dreaded "comeback".    

    NA Emissions and European MOT 
    You may have known that almost all states are using OBD2-based emission testing for all 1996 and newer passenger vehicles? Now with the 2010 legislation, even the  8500 - 10000lb trucks are required to be OBD2 complaint. If you have a Check Engine or Service Engine Soon indicator illuminated, or a specific inspection system monitor test fails, your vehicle will fail its emissions test. With ACI OBD2 scan tool you can inspect your vehicle¡¯s compliance before you wait in line and pay for the test. 

    Tuning Your Vehicle 
    Read live sensors such as wide-band O2 sensors, fuel adaptation, MAF, ignition timing advance, and lambda readings. If your vehicle supports wide-band O2 sensors, Scan Tool can show you real-time air/fuel mixtures. Finally, data log them all in TXT, CSV, and XML formats with 1ms sampling accuracy. 

    Performance Analyzer 
    Don't buy into claims of increased horsepower or added torque; you can verify whether that new, expensive part really works. Do your own dynamometer and acceleration testing at your own convenience and without having to rent expensive dynamometer time. 

    OE-Level Coverage (Enhanced Interfaces) 
    Independent service shops and vehicle tuners require more information than what OBDII can provide to do their job effectively. Since the OBDII standard covers   only emissions-related powertrain systems and sensors, there is more information you won't be able to see with a generic OBDII scan tool. With our enhanced interface options, you can get factory tool-like capabilities; allowing you to access hundreds of systems (ABS, airbags,  instrument  cluster,  etc.),  sensors,  and  system/component-level  bi-directional controls so you can do your job faster and with a greater degree of accuracy.  ACI supports non-OBDII and European models. For example, due to their  excessive vehicular weight trucks like the Ford Super Duty, Chevy Duramax, and  Dodge are not required to be OBDII compliant. But with our enhanced interface options you can now access the diagnostics capabilities of these vehicles.  For our European customers, our enhanced interface options also support Audi/VW, BMW, Chrysler/Dodge, Ford, Jaguar, Mercedes, and Toyota/Lexus diesel engines  and the European-specific models.

    ACI Enhanced Options 
    Ford (EI01) 1995-2010 
    GM (EI02) 1995-2010 
    Toyota/Scion/Lexus (EI03) 1995-2010 
    Chrysler/Dodge/Plymouth/Eagle (EI04) 1996-2010 
    Mazda (EI05) 1996-2010 
    Hyundai and Kia (EI09) 1998-2010 
    Nissan and Infiniti (EI06) 2000-2010 
    BMW and MINI (EI07) 1996-2010 
    Honda and Acura (EI08) 1996-2010 
    Land Rover (EI10) 2002-2010 
    Jaguar (EI11) 1995-2010 
    Subaru (EI12) 1999-2010 
    Porsche (EI13) 1997-2010 
    Isuzu (EI14) 1996-2010 
    Mitsubishi (EI15) 1996-2010 
    Audi / VW (EI16) 1996-2010 
    Mercedes (EI17) 1998-2010 

    Enhanced interface for Ford (EI01) 1995-2010 
    Although Ford does implement the largest subset of the OBDII standard, the  typical vehicle only supports 20 - 40 sensors and is limited to emissions powertrain. Using the enhanced Ford interface, a typical Ford vehicle will support 200 - 300 sensors within half a  dozen systems; that's essential systems such as ABS, airbags, GEM, ICM, etc. Our enhanced Ford interface coverage is only matched by factory tools; we have support for 4,800+ sensors selected from 94 systems. Support includes ISO, SCP, CAN, MCAN, and CAN 14229 controllers. The Ford enhanced interface has support for Ford of Europe diesel models such as Ka, Mondo, Galaxy, Fairlane, etc. Finally, our Ford enhanced has support for non-CAN and CAN 400+ bi-directional commands and dozens of system-level tests. With bi-directional controls, you will no longer be relegated to being just an observer in the operation of the vehicle now you can take control of its operation.  

    System Tests: 
    PATS Timed Key Programming ('96 - '08) 
    Power Balance (CAN-based models) 
    EVAP Bay Test 
    Service Bleed (Non-CAN support not available with ProLine currently) 
    Buzz Injector 
    Cylinder Contribution Test 
    Switch Test 
    Glow Plug Test 
    System Self-Test 
    Low - and High Speed Fan 
    All Outputs On/Off 
    Injector Coding (1.8L and 2.0L) 
    KAM Reset 
    Tire Size Programming up to 40" ('99-'03 7.3L, and '04-'07 6.0L) 
    IVD Initialization 
    Steering Angle / Yaw Rate / Acceleration Sensor Reset ('03 Explorer and Lincoln LS) 
    Passenger Seat ReZero 
    Power Seat Calibration Test 
    Audio Network Communication Test 
    Vehicle In-Motion IO Test 
    Front Wiper Self-Test 
    Rear Wiper Self-Test 
    Diesel Particulant Filter Reset, Clear EGR Adaptive Tables, and Clear Fuel Injector 
    Adaptive Tables 

    Enhanced interface for GM (EI02) 1995-2010 
    Our enhanced GM interface supports 6,400+ sensors selected from the engine, transmission,  body,  and  chassis  systems. For  you tuners  out  there,  our enhanced GM interface gives you access to the Crank Variation Learned test for most vehicles. Also, with our enhanced GM coverage is support for Workhorse 04+ MY vehicles (P42 Series,  W22 Series, W24 Series, W52 Series, LF72 Series, P32 Series, W18 Series, FE20 Series, W42 Series). Our enhanced GM interface coverage is only matched by factory tools; we have support for 6,000+ sensors selected from all 68 systems. Finally, our enhanced GM has support for 2,000+bi-directional commands and key system-level tests. With  bi-directional controls, you will no longer be relegated to being just an observer in the operation of the vehicle now you can take control of its operation. 
    Support includes dual-wire and single-wire CAN powertrain support. 

    Supports Global-A Vehicles: 
    Buick Allure 
    Buick LaCrosse 
    Cadillac SRX 
    Chevrolet Camaro 
    Chevrolet Equinox 
    GMC Terrain 

    System Tests: 
    ABS Automated Bleed Routine (ProLine Connector) 
    Crank Variation Learn (See: GM-specific vehicle systems for engines support details.) 
    Injector Flow Rate Programming (CAN Based Diesels) 
    TDC Learn 

    Enhanced interface for Toyota/Scion/Lexus (EI03) 1995-2010 
    Our enhanced Toyota interface supports engine, transmission, body, and chassis systems. System support includes the bi-directional controls and system tests such as Test Mode (Zero Point Calibration) setting for TCS / VSC systems. Additionally this support includes the Generation 1 and Generation 2 hybrids systems such as HV Battery and HV ECU. For these systems we also do support the Information Data #s reported with trouble codes.  

    System Tests: 
    Air Bleed--Usual and Master Stroke (ABS) 
    ECB Utility--ECB Invalid, Zero Down, and Linear Valve Offset Calibration (ABS) 
    Signal Check (Airbag, ABS, ABS CAN, EFI CAN, EHPS, EMPS, and TPWS) 
    Reset Memory (EFI, EFI CAN, ABS, ABS CAN) 
    Clear Records (EMPS and VGRS) 
    Zero Point Init (EMPS) 
    Sensitivity Check (OCC) 
    Inspection Mode (ABS CAN) 
    Test Mode--Zero Calibration (ABS, ABS CAN, TPWS, and OCC) 

    Enhanced interface for Chrysler/Dodge/Plymouth/Eagle (EI04) 1996-2010 
    Our enhanced Chrysler interface supports hundreds of sensors selected from the  powertrain, body, chassis, and transmission system. It includes hi- and low-speed sensor support giving you more sensors and faster throughput then our  competitors. This enhanced interface comes with its own hardware interface  specifically designed for Chrysler SCI and CCD based controllers. By doing a stand-alone interface we can offer you more SCI coverage then our competitors who are limited by electrical issues with generic OBD-II. Also supported is the CR2 and  CR3 Sprinter  ('04 - '06), Jeep Liberty Diesel ('05 - '06), diesel Cummins engines, and the Venom equipped Vipers ('08+). 

    SBEC/JTEC System Tests: 
    EGR System Test
    EVAP System Monitor Service Test 
    Erase All DTC Fault Codes 
    Generate Full Field Test 
    Gov & 3-4 Shift Valve Test - JTEC Only 
    Leak Detect Pump Test 
    Purge Vapors Test 
    Reset All Adaptive Memory Fuel Cells 
    Reset All Non-Volatile Memory 
    Reset CAM/Crank Misalignment 
    Reset CAM, Crank, and Sync Status Record 
    Reset Duty Cycle Monitor 
    Reset Engine Running Time Record 
    Reset Fuel Shut-off Record 
    Reset Intake Airflow Control Stepper Motor Position 
    Reset Trip Information 
    Set Sync Signal - JTEC Only 
    Set Minimum Throttle Position to Maximum 
    Torque Converter Clutch Test - JTEC Only 

    VPW Based System Tests: 
    ABS Bleed Brakes (EBC325, Mk20e, and Mk25e) 
    Tire Size Programming 
    Transmission Rear/Front Wheel Brake Torque Test 
    Transmission Pump Test 
    Transmission Quick Learn 
    Transmission TCC Break-In Test 
    Transmission Front Wheel Pinion Factor 

    NGC System Tests: 
    Injector Kill Test 
    NVLD Force Monitor Test 
    Purge Vapor Tests 
    Reset all On-Board Control Units 
    Report Part Number 
    Report Reflash Program Counter 
    CAN Based System Tests: 
    ABS Brake Bleed 
    Cylinder Performance Test 
    EATX Quick Learn 
    IMA Injector Programming 
    Injector Quantity Adjustment 
    LDP Forced Monitor Test 
    OCM Verification Test 
    Tire Size Programming  

    Enhanced interface for Mazda (EI05) 1996-2010 
    Our enhanced Mazda interface supports hundreds of sensors selected from the engine, transmission, body, and chassis systems. Support includes the CAN systems such as ABS and Tire Pressure Monitor systems.

    System Tests: 
    IVD Initialization (Lateral Acceleration and Yaw Rate Reset) 
    Self-Test (RCM and GEM) 
    Passenger Weight ReZero 

    Enhanced interface for Nissan and Infiniti (EI06) 2000-2010 
    Our enhanced Nissan interface supports code retrieval/resetting, sensors, and actuations from the engine, BCM, transmission, ABS, airbags, 4WD systems, and  CAN systems. Coverage includes the Work Support configuration commands such as Target Idle Ignition Adjustment; with it you can permanently advance your ignition timing to gain few extra HP. Trouble code retrieval includes the NATS 5.0 system and the detailed status byte support. Finally, we seamless integrate CAN and non-CAN systems so that you won't have to worry about switching hardware to retrieve all the troubles codes from each module.

    System Tests: 
    Self-Diagnostic (Airbag) 
    ECU Part Number (Airbag) 
    Diagnostics Record (Airbag) 
    Reset ECU (Powertrain) 
    Work Support/Configuration Functions (Some 01+ and Most '03+) 
    Target Idle Ignition Adjustment 
    Target Idle RPM Adjustment 
    Idle Air Volume Learn 
    Self-Learning Control 
    CAN Module Configurations: 
    Door Lock Unlock Set 
    Anti-Lock Out Set 
    Set IL Door Unlock 
    Room Lamp Off Time Set 
    Room Lamp On Time Set 
    Keyless Entry Horn Chirp Set 
    Keyless Entry Hazard Lamp Set 
    Keyless Entry Multi-Answer Back Set 
    Keyless Entry Auto Lock Set 
    Keyless Entry Panic Alarm Set 
    Keyless Entry Trunk Open Set 
    Keyless Entry Power Window Down Set 
    Head Lamp Battery Saver Set 
    Head Lamp Custom Light Setting 
    Head Lamp Illumination Delay Set 
    Wiper Speed Setting 
    Security Alarm Set 
    Theft Alarm Trigger Erase  

    Enhanced interface for BMW and MINI (EI07)1996-2010 
    Our enhanced BMW interface supports thousands of sensors and bi-directional controls selected from 190+ controllers such as engine (DME), transmission (EGS), ABS, airbags, and other body and chassis systems. With our enhanced BMW, we support translating BMW FC codes into OBDII DTCs for all engine and transmission  controllers. Also, supported is such status information as the fault frequency and fault conditions.

    Model Coverage: 
    1 Series E8X (2004-2009) 
    3 Series E36/E46/E9X (1996-2009) 
    5 Series E39/E60 (1997-2009) 
    6 Series E62/E63 (2004-2009) 
    7 Series E38/E65/E66 (1996-2009) 
    X3 E83 (2004-2009) 
    X5 E53/E70 (1999-2009) 
    X6 E71 (2008-2009) 
    M3 E36/E46/E9X (1996-2009) 
    M5 E39/E60 (1999-2009) 
    M6 E62 (2004-2009) 
    MINI R50/R51/R53/R55/R56/R57 (2001-2009) 
    Z3 (1998-2002) (1.9L, 2.0L, 2.2L, 2.3L, 2.5L, 2.8L, and 3.0L) 
    Z4 E85/E86 (2003-2009) 
    Z8 (1999-2003) 

    System Tests: 
    Determine All Systems Present and Operating 
    Display Service and Inspection Information 
    Display Coding Information 
    Self-Test (Safety and Information) 
    Steering Angle Adjust (MK20, MK60, DSC 8 [E46, E90, E83, and MINI all models]) 
    Lateral Acceleration and Pressure Adjust (MK60 [E46 non-M models and MINI]) 
    ABS Bleed (MK60 [on E46 '03+, E85/E86, and MINI models]) 

    Service Functions: 
    Reset Airbag Light 
    Register Replacement Battery (D80 and V80) 
    Reset Oil Service Light (for all 9/2000+ models) 
    Reset Service Interval Distance and Time (for all 9/2000+ models) 
    Reset Conditional Based Service (E6X and E9X models) 
    Reset DME, EGS, and RLS Adaptations 
    Clear and Set Transport and Sleep Modes 
    Teach In Clutch Slipping, Teach In Clutch Characteristic Curve, Teach Clutch Values, 
    and Longitudinal Acceleration Sensor Offset (SMG II)
    Enhanced interface for Honda and Acura (EI08) 1996-2010 
    Our enhanced Honda interface supports hundreds of sensors and bi-directional controls selected from the engine (PGM), transmission (TCM), ABS, and airbag systems.

    System Tests: 
    ADS Damper Forced Operation 
    ADS Jack-Up Stroke Calibration 
    ATTS Lateral G And Yaw Rate Calibration 
    ATTS Steering Angle Calibration 
    Calibrates All Sensor (ABS Type 1 & 4) 
    Crank Position Sensor Notch Learn 
    DBW Throttle Carbon Clogging Reset 
    DBW Throttle Carbon Clogging Status 
    Engine Oil Replacement Reset 
    OPDS Initialization 
    OPDS Sensor Adjustment 
    Reset Wheel Speed Pulse Counters (ABS Type 1 & 4) 
    Resolver Zero-Position Offset Calibration 
    SWS Initialization  

    Enhanced interface for Hyundai and Kia (EI09) 1996-2010 
    Our enhanced Hyundai and Kia interface supports hundreds of sensors selected from the powertrain, body, chassis, and transmission systems. Coverage includes the European counterparts such as the Azera, Enterprise, Picanto, Pride, etc.  Finally, we support retrieving the ECM information block to view Boot Software  Number,  ECU  Hardware Number, Programming Date, etc.

    System Tests: 
    EVAP Leak Test (Siemens 655 [Rev 17, 18, 19], 670 [Rev 8], Bosch COM 1.1) 
    Reset Adaptions
    PODS Reset 
    Read Block Information 
    Steering Angle Calibration (ABS/ES 95660 [Rev 23 and 32]) 

    Enhanced interface for Land Rover (EI10) 2002-2010  
    Our enhanced Land Rover interface supports hundreds of sensors and bi-directional controls selected from the engine, transmission, body, and chassis controllers. Coverage includes the Freelander (2002-2005), New Range Rover (2002.5-2010), LR2 (2007-2010), LR3 (2004-2010) LR4 (2010). 

    Advanced features besting even the factory solutions: 
    View more then 16 sensors at one time 
    Faster connections 
    More PIDs available on most controllers 
    Steering Lock Column Module fully integrated 

    Service Functions: 
    Display Service and Inspection Information 
    Display Coding Information 
    Reset Service Interval Distance and Time (for '00+ BMW-based models) 
    Reset DME and EGS Adaptions  

    Enhanced interface for Jaguar (EI11) 1995-2010 
    Our enhanced Jaguar interface supports hundreds of sensors and bi-directional controls selected from the engine, transmission, body, and chassis controllers. Coverage includes the XK, X Type, S Type, XJ, and XF models. Additionally,  coverage includes the late model medium speed CAN (MCAN) controllers such as HVAC, Audio, Keyless Vehicle, Park Aid, Side Object Detection Control, Central Junction, etc.

    Advanced features besting even the factory solutions: 
    View more then 16 sensors at one time 
    More intuitive and powerful user-interface 
    OBD-II functionality integrated with Jaguar-specific functionality 
    Faster connections 
    More PIDs available on most controllers 

    Service Functions: 
    Injector Coding (2.0L) 
    Brake Sensor Setup 
    Display Last Alarm Activations (SLM and GEM) 
    Display Fuel Adaptation Tables 
    Fuel Adaptation Monitor 
    Electronic Parking Brake Release To Service 
    Front And/Or Rear Light Calibration (ADHLS and HCM) 
    Reset TCM Adaptations (most models) 
    Yaw and Lateral Accelerometer Calibration 
    Reset ABS Configurations 
    System Self Test (SType Only GEM, REM, DDM, PDM) 
    EVAP Leak Test (some ECM variations are not currently supported) 
    Enhanced interface for Subaru (EI12) 1999-2009 
    Our enhanced Subaru interface supports hundreds of sensors selected from the engine, transmission, and late model ABS systems.

    Permanent Functions: 
    Retard Ignition 
    Idle RPM Adjustments (with AC and without AC) 

    Enhanced interface for Porsche (EI13) 1994-2010 
    Our enhanced Porsche interface supports live data, bi-directional actuations, system-level tests, and trouble code retrieval and clearing from 60+ systems. Coverage includes the popular 911 (1994-2009), Boxster (1997-2009), Cayman  (2006-2009), Carrera GT (2005-2006), Cayenne (2003-2009). With our enhanced  Porsche, we support live data and drive links from more than 50+ controllers. If live  data isn't enough, we have component-level actuations so you can test a component on your own terms instead of recreating the conditions for actuation. Finally, with Vehicle Data support (i.e., Ignition Ranges counters) you can see the state of your vehicle prior to repair or purchase.

    Advanced features besting even the factory solutions: 
    More intuitive and powerful user-interface 
    OBD-II functionality integrated with Porsche-specific functionality 
    VIN-based model decoding for rapid vehicle identification 
    Plug-n-Play hardware requiring no device drivers 
    Trouble code status byte decoding to assist in determining the nature of the fault 
    English translations of fault codes 

    Service Functions: 
    Event Memory (Airbag) 
    Operating Hours (Airbag) 
    Calibration (HBA and Air Conditioning) 
    Events and Erase Events (Instrument Cluster) 
    Events, Erase Events, and Reset (Instrument Cluster CAN) 
    Display Module Information 
    Display Vehicle Data (986/987/996/997)    
    Enhanced interface for Isuzu (EI14) 1996-2010 
    Our enhanced Isuzu interface supports hundreds of sensors selected from the engine,  transmission, airbag, and ABS systems. 

    Enhanced interface for Mitsubishi (EI15) 1996-2009 
    Our enhanced Mitsubishi interface supports hundreds of sensors selected from the MFI, ABS, AT, Immobilizer, Advanced features besting even the factory solutions.
    Advanced features besting even the factory solutions: 
    More intuitive and powerful user-interface
    Faster updates 
    View more then 8 sensors are once 

    Special Functions: 
    ECU Information (All CAN controllers) 
    EVAP Leak Test (MFI CAN) 
    EVAP Leak Monitor (MFI E200, E400, E500, E600, 1400, and 1600 Series) 
    Gas Emissions Test Mode and Sensitivity Check (ABS CAN) 
    Reset Learned Values (MFI CAN) 
    Zero Calibration (Some OCM CAN) 
    SAS Ini, tialization (SAS CAN) 
    Steering Angle Initialization and Operation Test (ACD CAN) 
    Air Bleed and Lateral G Sensor Initialization (ACD CAN) 
    Service Interval Reset (Meter CAN) 
    Tire Pressure Sensor ID Check (TPMS CAN (Front Only))  

    Enhanced interface for Audi/VW (EI16) 1996-2010 
    Our enhanced Audi/VW interface supports hundreds of sensors selected from the engine, transmission, ABS, airbag, and dozens of other systems. To help facilitate ease-of-use for this interface, we've allowed users to select as many sensors as they want. We also do not  require  that  certain  sensor  groups  to  be  selected  in  specific  orders.  We've  also extended our support by allowing module coverage to be externally added by way of the Audi Information File (AIF). These files can be generated during a network test or during a module sensor mapping test and help extend the over all coverage of the interface untill such coverage can be built into the software. Many of the features that Audi/VW features offer  are  not  consistent  with  other  manufactures  (i.e.  Ford,  GM)  as  they  do  not offer component-level actuations and the sensors vary based on installed modules. Like most aftermarket Audi/VW tools, some of the sensor descriptions are missing, but data values can still be retrieved with basic descriptions. It is therefore strongly recommend to use a service manual alongside our tool while working on these vehicles. 

    Advanced features: 
    ADC Channels 
    Basic Settings 
    Coding II/Login (7-digit PIN/SKC Not Supported) 
    Gateway List (CAN) 
    Module Information 
    Module Recoding 
    Long Coding 
    Soft Coding 
    Module Sensor Mapping 
    Network Test 
    Output Tests (Automatic and Specific) 
    Optical Bus Diagnostics (CAN) 
    SRI Reset 
    Transport Active/Deactive Mode (CAN)  

    Enhanced interface for Mercedes (EI17) 1998-2010 
    Our  enhanced  Mercedes  interface  supports  thousands  of  sensors  and  hundreds  of  bi-directional controls for systems such as DME, EGS, ABS, AAC, BAS, SRS, WSS, EWS, CGW,  ICM,  DAS,  MRM,  LCP,  UCP,  OCP,  SAM,  and  dozens  more  body  and  chassis controllers. Support includes systems on both the 16pin OBDII and 38pin interfaces. Live  data,  bi-directional  controls,  and  trouble code retrieval for the popular M and GL Class (163 / 164), SLK Class (170 / 171), C Class (202 / 203 / 204), CLK Class (208 / 209), E Class (210 / 211), CL Class (215 / 216), CLS Class (219), S Class (220 / 221), SL Class (230), B Class (245), R Class (251), G Class (463), and V Class(Viano/Sprinter). Trouble code retrieval only for DAS 3 equipped S Class (140) models currently. 

    Advanced Features: 
    Display Adaptation Values (DME 2.0) 
    Display ECU Information 
    Reporting Status Byte and SubType codes 
    VIN model decoding 
    Support for D- and N-Codes 
    Read and Clear Fault Codes/Events 

    Service Functions: 
    Power Window Denormalization for DCM aand LCP controllers 
    Reset ECU 
    SBC Deactivation and activation 
    Reset Sensor and Mixture Adaptation (ME2.8) 
    Reset Adaptation Values, Cold Start Adaptation Values, and Activate Fuel Pump (ME9.7) 
    Learn  Throttle  Valve  Stop,  Teach-In  Ethanol  Portion,  and  Reset  Ethanol  Teach-In 
    Processes (ME9.7) 
    Reset Quantity Mean Value Adaptation Data (CDI2 - CDI5) 
    Reset Transmission Adaptations (EGS52, EGS53, and VGS2) 
    Reset Service Interval ('03 and earlier with FSS only) 
    Reset Oil Service ('03 and earlier with FSS only) 
    Rodeo, Pitch, Roll, and Move Towards Calibrated Level functions (ABC and ABC230)

    1, English,
    2, German,
    3, Spanish,


    Copyright£ºAutofocus Technology Co.,Ltd | Website£ºwww.ecufocus.com | E-mail£ºinfo@ecufocus.com Network