VAG K+CAN Commadner 5.3
Diagnostic via CAN and Special functions via K-line.
Covers all electronic control units in vehicles (diagnostic addresses from 0x01 to 0x80). This can allow of user to investigate and diagnosis some new units untouchable for remaining diagnostic tools. Functions are under CAN-TP2.0.
Manual definition of running diagnostic session not like remaining diagnostic tools always standard diagnostic session 0x89. Function is under CAN-TP2.0.
Broadcast diagnostic request disable normal communication, clear DTCs, Logistic (transport) mode,.... Functions are under CAN-TP2.0.
Allows managing of brand new units (and immobilizer units) where is allowed programming of PIN, SKC, BGW, MAC. Functions are under CAN-TP2.0.
Most of popular diagnostic requests identifications, coding, adaptations, DTCs and s.o. Functions are under CAN-TP2.0.
Now we providing possibility of our customeres for odometer correction of latest VW/SEAT/SKODA produced after 09/2006 up to now!!! Tiguan, EOS, Scout, .... no more problematic vehicles for our customers.
Added support for reading PIN code by OBDII from immobilizer boxes - VW Golf3, VW Polo, VW GOL ...
By OBDII - odometer correction R/W eeprom of instrument clusters, PIN code reading from Skoda Fabia 2007+, VW Polo VDO 2007+, Seat Ibiza VDA 2007+, Skoda Roomster - all crypted. New version of Instrument cluster from VW T5/Multivan 2008 added.
UDS diagnostic protocol used in the latest vehicles from VAG is now implemented in VAG Commander.
Reduced used PC's resources. Now not a problem running on older PCs.
Bugfixes
By OBDII - Reading odometer value stored inside of ECU MED9x by OBDII
Improved procedure for additional key programming without losing older programmed
Extended "Kessy database" for key programming and extracting security codes for vehicles equiped with immobilizer type "Kessy" - Audi A8, Porsche Cayenne, Bentley continental, VW Phaeton, VW Touareg
Checksums calculations in dump of ME7x
Programming component security in : steering lock of new vw passat 6, ECU siemens PPD, ECU MED9x, EDC16x, EZS kessy
By OBDII - Audi RB4/RB8 - exact KM adjusting, programming component security, extracting security code from instrument cluster
By OBDII - Read EEPROM of EDC16U1, EDC16U31, EDC16U34, EDC16CP, EDC16CP34
By OBDII - Read security access code/Login WFS stored in EDC16U1, EDC16U31, EDC16U34, EDC16CP, EDC16CP34
By OBDII - Read security access code/Login WFS stored in MED 9.5.10 and MED 9.1
By OBDII - Read/Write odometer stored in EDC16U1, EDC16U31, EDC16U34, EDC16CP, EDC16CP34
Support for all DTCs according ISO 15031-6
Possibility to scan all units in the car using CAN TP2.0, CAN TP1.6, KW1281 and KW2000 and displaying the numbers of DTCs stored in each device
Generally changed user interface
Now VAS Numbers used to connect to the devices
Configuration of used diagnostic protocols, bus-timings, etc.
By OBDII - Change odometer, R/W EEPROM of instrument clusters MY2007/2008 from VW Touareg-CAN, VW Phaeton-CAN, Bentley Continental-CAN, Porsche Cayenne-CAN
By OBDII - ECU reflashing counters programming and flash memory R/W EDC16Ux - V10 TDI engines (master and slave)
By OBDII - Skipping component security protection Audi A3 while programming keys
By OBDII - Possibility to add new key without losing of older learned keys to VW Golf5, VW Touaran, VW EOS, VW Caddy, Skoda Octavia II, Skoda Scout, Seat Leon, Seat Altea, Seat Toledo (CAN-TP2.0 up to 09/2006)
Possibility to program "dealer key" for Audi A8 to avoid problem with component security protection while learning of keys (available for HITAG-2 programmer owners)
By OBDII - Clearing crashdata, R/W EEPROM of airbag units from VW/Audi/Seat/Skoda-BOSCH/SIEMENS up to year 2005
Full diagnostic activites under KW2000-K, KW1281-K, TP1.6-CAN -> now covered by CAN MY2008 VW Touareg, VW Phaeton, Bentley Continental, Porsche Cayenne
Now when R/W flashmemory of EDC15 by OBDII not necessary to remove fuses
Audi A4 RB8 crypto - R/W EEPROM by OBDII; special function "Dump Tool" - extracting security codes KESSY, SIMOS PPD, MED9x,...; Reading flash memory of ECU MED9.5.10 and Siemens PPD1.x; new user interface - measured values, basic settings, output tests, security access, ...
Possibility to set to VIRGIN state dashboards by K and CAN (VW/SEAT/SKODA-CAN, VDO-K, BOSCH RB4 crypto...). Option to be changed FLASH TOOL number inside of EEPROM memory of EDC16. Possibility for adaptation of a new KESSY to the vehicle.
Special function - odometer correction in instrument clusters and EDC15x.
Special function - read Security Access Code/Login WFS.
Special function - read/program immobilizer data.
Special function - read/write EEPROM from instrument cluster/immobilizer. All supported clusters CAN/K.
Special function - VAG MMI TV Activation.
Special function - Read/Write EEPROM of Engine Control Units BOSCH VAG-EDC15x, VAG-ME7.1.1, VAG-Cartronic ME7.8,Porsche.
Special function - Key learning buttons for easy usage (not needed security code). Can do component security authorization.
Special function - Key learning Porsche CAYENNE (not needed security code) K+CAN.
Special function - Custom memory reading from different units like ECUs, EZS-Kessy and s.o..
Special function - Reading flash memories EDC16x, EDC15x, ME7x, MED951, MED751 (with next update will be possible programming of flash memories
Special function - Crash data clear in airbag units
List of vehicles covered from function odometer change via OBDII:
Audi Q7 (CAN)
Audi A2 (K)
Audi A3 (CAN) up to 2007 !!!
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO/M73 (K)
Audi A4 BOSCH - RB4 clusters (CRYPTO eeproms R/W by OBDII)
Audi A6 VDO (K)
Audi A6 (CAN)
Audi Allroud (K) up to 2004
Audi A8 (K) VDO93xx
Audi A8 (CAN) up to 2007 !!!
Audi TT (K)
Seat Alhambra (K)
Seat Altea (CAN)
Seat Arosa (K)
Seat Cordoba after 1999 (K)
Seat Ibiza VDO after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia (K)
Skoda Octavia II (CAN)
Skoda Superb (K)
Skoda Roomster (K)
Skoda Scout (CAN)
Skoda Fabia (K)
VW Bora (K)
VW Beetle (K)
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer/BOSCH RB
VW Golf5 VDO (CAN)
VW Golf5 VISETEON
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5/B6 (K+CAN)
VW Polo VDO/Motometer (K)
VW Sharan (K)
VW T4/T5 VDO (K)
VW Touaran VDO (CAN)
List of vehicles covered from function security access code/login reading via OBDII:
Audi A2
Audi A3 (CAN) up to 2007 !!!
Audi A3 VDO/M73 up to 2003 (K)
Audi A4 VDO (K)
Audi A4 BOSCH (K) up to 2001
Audi A4 after 2000 - petrol engines >= 1.8
Audi A6 VDO (K)
Audi A6 (CAN) petrol engines
Audi Allroad (K) up to 2004
Audi Allroad (CAN) petrol engines
Audi A8 up to 2001
Audi A8 from 2001 to 2002 2.5TDI
Audi A8 (CAN) 2003+ petrol
Audi TT (K)
Audi Q7 petrol engines
Seat Altea (CAN)
Seat Cordoba after 1999 (K)
Seat Ibiza (VDO) after 1999 (K)
Seat Leon (K+CAN)
Seat Toledo (K+CAN)
Skoda Octavia
Skoda Octavia II (CAN)
Skoda Superb
Skoda Roomster
Skoda Scout (CAN)
Skoda Fabia
VW Bora
VW Beetle
VW Caddy (CAN)
VW EOS (CAN)
VW Golf4 VDO/Motometer/BOSCH RB
VW Golf5 VDO (CAN)
VW Crossgolf (CAN)
VW Individual (CAN)
VW Jetta (K+CAN)
VW Passat B5 (K) B6(CAN)
VW Polo5
VW Sharan after year 2000
VW T5
VW Phaeton petrol
VW Touareg petrol
VW Touaran VDO (CAN)
PORSCHE Cayenne (CAN/K)
Current version 3.3 covers VW/SEAT/SKODA (CAN) up to September 2006 while AUDI covered up to now
|
